The Perspiration Tester is supplied as a stainless steel frame capable of holding up to 20 samples. The samples are generally 10cm x 4cm and are held between acrylic separator plates. The unit is supplied with a weight and a supplementary plate allowing both ISO and AATCC test methods to be performed.
Brand:
AVENOItem NO.:
AC08Payment:
T/T, L/CProduct Origin:
ChinaShipping Port:
Xiamen portLead Time：
3daysApplication
Perspirometer is supplied as a stainless steel frame capable of holding up to 20 samples. The samples are generally 10cm x 4cm and are held between acrylic separator plates. The unit is supplied with a weight and a supplementary plate allowing both ISO and AATCC test methods to be performed.
Principles
To test colour fastness to perspiration, specimens (fabric, yarn or fibre) in contact with multifibre fabric are treated in two different solutions. One solution is acid and one solution is alkaline. The specimens are subsequently drained and placed under a specific load between the separator plates. The units are placed in an oven for a pre-determined length of time, after which time the units are removed from the oven. The specimens are removed from the separator plates and placed in an oven/incubator to dry after which they are assessed with grey scales.
Note for testing colour fastness to cold water, the same apparatus is used and the solutions are substituted for distilled water.
Feature
1. The steel frame and steel hammer body are made of 316L steel, which can resist acid and alkali and corrosion for a long time.
2. The steel hammer adopts the 45+5N style combined weight hammer, which can meet the requirements of the American standard and the European standard for the test conditions.
Standards
|
Model |
AC08-Perspiration Tester |
|
Perspiration test |
GB/T 3922, ISO 105-E04, AATCC 15, JIS L0848 |
|
Sea water test |
GB/T 5714, ISO 105-E02, AATCC 107 |
|
Water test |
GB/T 5713, ISO 105-E01, AATCC 106 |
|
Saliva test |
GB/T 18886 |
Dimension & Weight
|
Model |
AC08-Perspiration Tester |
|
Dimension |
240*100*160mm |
|
Weight |
7kg |
Key Specification
|
Model |
AC08-Perspiration Tester |
|
Hammer |
50N±1% (45+5N) |
|
Laminated board size |
115*60*1.5mm |
|
Pressure |
12.5kpa |
Standard Accessories
|
Model |
AC08-Perspiration Tester |
|
Test load (45+5N) |
1set |
|
1.5mm Plastic Separator plate |
21pcs |
|
3.0mm Plastic Separator plate |
21pcs |
|
Liquid tank |
2pcs |
|
Aluminum protection box |
1pc |
AVENO Related Products:
1. AC10 Washing Color Fastness Tester
Product Links: https://www.garmenttester.com/ac10-washing-color-fastness-tester_p82.html
2. AC12 Laboratory Precision Drying Oven
Product Links: https://www.garmenttester.com/ac12-laboratory-precision-drying-oven_p97.html
Textile Electronic Laboratory Padder is suitable for dyeing and finishing padding, testing the pressure absorption rate of fabric dyeing, post-processing effect and fabric quality. It is suitable for pure cotton, T/C and other chemical fiber fabrics.
The Electronic Rotary Vertical Crockmeter is used to determine the color fastness of small-area printed or dyed textiles under dry or wet friction.
AATCC Electronic Crockmeter mainly consists of the control system and friction system, fix sample by sample holder on the end of the base sticking a sandpaper, put abrasion head with a white cotton cloth on the sample. After rubbing the fixed number of times, observe sample and evaluate the coloring degree of white cotton cloth comparing with gray card, make judgments to the stain of the fabric sample or the stability of surface coating provide reference data for the assessment and selection of materials.
AC05B AATCC Crockmeter is suitable for testing the color fastness to rubbing and staining of various textiles (made of various fibers, dyed or printed yarns, fabrics and textile products, including textile carpets and other velvet fabrics).
Rubbing Fastness Tester mainly uses a sample holder to fix the sample and sandpaper on one side of the base. Shake the handle to make the friction head with white cotton cloth reciprocate on the sample with a specified stroke. After rubbing ten times, observe and compare and evaluate with a gray card. The degree of sticky color on the white cotton cloth judges the dyeing of the fabric sample or the stability of the surface coating, and provides reference data for the evaluation and selection of materials.
Lab Color Matching Light Box are widely used in the field of color management in various industries such as textiles, plastics, paints, inks, printing and dyeing, printing, pigments, packaging, ceramics, leather, cosmetics, etc., to accurately check the color deviation of goods and improve product quality and market competitiveness.
AATCC Electronic Crockmeter is suitable for testing the color fastness to rubbing and staining of all kinds of textiles (made of various fibers, dyed or printed yarns, fabrics and textile products, including textile carpets and other velvet fabrics).
Rubbing fastnes Tester Crockmeter uses dry or wet white cotton cloth to tie the surface of the friction hammer of the machine. According to the specified method, with a certain load and number of times, the sample and the white cotton cloth for friction are rubbed against each other, and the degree of staining of the white cotton cloth for friction is equal to Staining rating gray scale for comparison, and assessing the color fastness to rubbing
Tel : 15280858852
Whatsapp : 15280858852
Email : market@avenotester.com
Skype : sales@avenotester.com
Address : 1# Zhongjunshangcheng, Nanhuan Road, Licheng Region, Quanzhou of Fujian China
