Zipper Fatigue Tester is suitable for testing zipper under the action of horizontal and vertical tension can bear the prescribed number of reciprocating drive operation or not.
Brand:
AVENOItem NO.:
AG08Payment:
T/T, L/CProduct Origin:
ChinaShipping Port:
Xiamen portLead Time：
3-7 daysApplication
Zipper Fatigue Tester is suitable for testing zipper under the action of horizontal and vertical tension can bear the prescribed number of reciprocating drive operation or not, test for zipper in a tension action of lateral and longitudinal, it could be tested its bearing ability in reciprocating motion for a regulation time.
Standards
CNS -1083, BS 3084, QB/T2171, 2172, 2173.
Principle
Clamped test zipper ends in the upper and lower fixture, horizontal and vertical exert a certain tension, pull the zipper head use constant speed made zipper do open and close action, to check whether the zipper is damaged after a certain number of times.
Dimension & Weight
|
Model |
AG08 Zipper Fatigue Tester |
|
Dimension |
66 cm*32.5 cm*57.3 cm |
|
Weight |
65 kg |
Key Specification
|
Model |
AG08 Zipper Fatigue Tester |
|
Reciprocating speed |
30cycles/min |
|
Gripping device width |
25mm |
|
Sample angle during test |
Open 60°, Close 30° |
|
Reciprocating stroke |
82.5mm |
|
Reciprocating speed |
30 cycles/min |
|
Reciprocating travel |
75mm |
|
Power Supply |
AC220V, 50/60HZ |
Standard Accessories
|
Model |
AG08 Zipper Fatigue Tester |
|
Angle gauge |
2pc (60°and 30°) |
|
Position pieces |
8pcs |
|
Inner hexagon wrench |
1pc |
|
Power line |
1pc |
Martindale Abrasion Tester is suitable for the test of the degree of abrasion and pilling of fabrics. It is also suitable for fabric abrasion resistance test. Martindale Abrasion Tester is widely used in textile testing.
Hydrostatic Head Tester is used to measure the impermeability of various fabrics that have undergone water-repellent treatment.
ICI Pilling and Snagging Tester is used to determine the surface fuzzes and pilling properties of both woven and knitted materials.
Spray Rating Tester is used to determine the surface wetting resistance of fabrics.
Bursting Strength Tester is suitable for various textiles, non-woven fabrics, leather and other materials, when the force is applied in all directions of warp and weft at the same time (elastic diaphragm method), the performance measurement of expansion force and degree of expansion.
0.01g Balance with durable stainless steel scale, weighing, peeling, counting, unit conversion.
Button Snap Pull Tester is used to test whether the buttons sewn on the clothes can withstand the strength required by the standard.
Tensile Strength Tester is used in various materials such as rubber and plastics, footwear, leather, clothing, textiles, insulators, terminals, etc., to test the development of materials such as stretching, tearing, peeling, and bending.
Tel : 15280858852
Whatsapp : 15280858852
Email : market@avenotester.com
Skype : sales@avenotester.com
Address : 1# Zhongjunshangcheng, Nanhuan Road, Licheng Region, Quanzhou of Fujian China
